Plywood Manufacturer & Supplier in India

  • +91 79 26891150
  • margoply@gmail.com
Margo Plywood


Margo  Flush Door


Margo BWP flush door is a durable product for its excellent quality, exceptional finish, and unique dimensional stability. It is made of hardwood frames and accurate battens. It is evenly constructed with selected species of timber that matters the most in Formaldehyde resin is used for bonding the layers.

Features:

  • Free from corrugation and roughness
  • High screw holding capacity
  • High shock resistance
  • Boiling water proof
  • Smooth surface
  • Lab tested and eco friendly
  • Zero gap and zero bending
  • Thickness: 25, 30, 35, 40 mm

Technical Specifications (IS: 710)

NO TEST ISI REQUIREMENT OBSERVED VALUE
1 Dimension Length, width - + 5mm
Thickness - + 1mm
Within limits
2 Squareness Deviation not more than 1 mm on a length of 500mm Deviation below 1mm
3 General Flatness Twist, cupping, warping not to exceed 6 mm  
4 Local Planeness Depth of deviation at any point to be less than 0.5 mm Within limits
5 Impact Indention Test Depth of Indentation not to exceed 0.2mm Within limits
6 Edge Loading Test

Deflection of edge with  max.

TO Be Less Than 5mm

Within limits
7 shock Resistance Test No Visible defect after test No Visible defects
8 buckling Test

Initial deflection - < 50 mm

residual deflection - < 5 mm

Within limits
9 slamming Test No Visible demage after Test No visible demage
10 Misuse Test No deformation after Test No deformation
11 Varying Humidity Test No visible warping, twisting or de-lamination

No such defects obseved

12 End Immersion Test No de-lemination at the end

No de-lemination

13 Knife test Minimum Pass Standard Excellent
14 Glue adhesion test No de-lemination

No de-lemination

15 Screw Withdraw Test Load to withdraw screw to be ore than 1000N Load - > 1000N